Rescanning the entire site after addressing detected vulnerabilities can be time-consuming.
By selecting only the targeted vulnerabilities and rescanning them individually, you can save time compared to rescanning the whole site.
Select Rescan Targets: On the Scan Results (List) screen, check the boxes for the vulnerabilities you want to rescan.
Specify Execution Timing: Choose either "Immediately" or "Execute at Scheduled Time".
Check Detection Results: If the fix is complete, the corresponding vulnerability will automatically be hidden from the list.
For detailed screen operations and important notes, please refer to the explanations at the bottom of this page.
｜ Table of Contents
|
|
1. Selecting the Rescan Targets
First, navigate to the menu via Scan List > Hamburger Menu (Three Lines) > Scan Results (List).
Depending on the remediation status of your vulnerabilities, you can select the rescan target using one of the following three methods:
Execution Method |
Recommended Case |
Scope of Scan |
①Rescan All |
When fixes span across various areas |
All previously detected items |
②Rescan Selected |
When you want to verify fixes for specific vulnerabilities only |
Only the checked items |
③Rescan from Details |
When you want to proceed while checking the behavior one by one |
Only the currently open item |
■Rescan All
Click the "Rescan All" button to rescan all the vulnerabilities detected in the previous scan.
When a rescan is performed, all vulnerabilities detected in the previous diagnosis are hidden, and only those vulnerabilities detected again in the rescan are displayed.
■Rescan Selected
If you want to specify the detected vulnerabilities individually and rescan them, click the "Specify and Rescan" button. Next, select the vulnerabilities you want to rescan.
Next, check the vulnerabilities you want to rescan, and then click "Run Rescan" to rescan the detected vulnerabilities individually.
After rescanning, the specified vulnerability will be hidden and will be displayed if it is detected again in a rescan.
■Rescan from Details
Rescans can also be executed from the "Run Rescan" tab in the Scan Result dialog box. Select your desired Crawl option and Scan Speed, then click "Run Rescan" .
2. Specifying the Execution Timing
Before running a rescan, you can specify the start timing using one of the two options below:
Immediately The rescan will run right away.
Execute at Scheduled Time The rescan will automatically start at the specified date and time. (Note: Scheduled rescans can be viewed and managed in the existing Schedule List.)
3. Checking Detection Results After Rescanning
After the rescan is complete, verify whether the fixes have been correctly reflected.
To Check If Vulnerabilities Have Been Resolved
If the corresponding vulnerability is not detected in the rescan, it will not appear in Scan Results (List). If it is no longer displayed, you may consider the vulnerability resolved.
To Check Detection Results from Before the Rescan
Clicking "Show Hidden Results" allows you to view the detection results prior to the rescan.
Hidden detection results will be displayed with a ~~strikethrough~~ line.